Installation Manual

Prerequisites
• Configure iLO Settings privilege
• An iLO license that supports this feature is installed. For more information, see the following
website: http://www.hpe.com/info/ilo/licensing.
Creating a group
1. Create a set of systems by using the filters on the iLO Federation pages.
2. Navigate to the iLO Federation→Group Configuration page.
The filters you apply when you create a set of systems are listed at the top of the page. To
remove a filter, click the X icon.
If no iLO Federation groups exist, this page displays the following message: There are
no configured groups. Use the Administration→iLO Federation page to create a
group.
3. Select a group from the Selected Group menu.
All of the systems in the selected group that meet the selected filter criteria will be added to
the new group.
4. Enter the following information:
• Group Name—The group name, which can be 1 to 31 characters long.
• Group Key—The group password, which can be from the configured minimum password
length to 31 characters long.
• Group Key Confirm—Confirm the group password.
5. Select from the following privileges:
• Administer User Accounts
• Remote Console Access
• Virtual Power and Reset
• Virtual Media
• Configure iLO Settings
• Login Privilege
This step defines the privileges that members of the group have for configuring the other
members of the group.
6. Optional: Enter the Login Name and Password for a user account on the remote systems
you want to manage.
This information is required if the selected group does not have the Configure iLO Settings
privilege on the remote systems you want to manage.
To enter credentials for multiple remote systems, create a user account with the same login
name and password on each system.
58 Configuring iLO Federation