Installation Manual

6 Configuring iLO access settings
iLO access settings
You can modify iLO access settings, including service settings and access options.
The values you enter on the Access Settings page apply to all iLO users.
The default access settings values are suitable for most environments. The values you can modify
on the Access Settings page allow customization of the iLO external access methods for
specialized environments.
Configuring iLO service settings
Prerequisites
Configure iLO Settings privilege
Configuring the service settings
The TCP/IP ports used by iLO are configurable, which enables compliance with site requirements
and security initiatives for port settings. These settings do not affect the host system. The range
of valid port values in iLO is from 1 to 65535. If you enter the number of a port that is in use, iLO
prompts you to enter a different value.
Changing these settings usually requires configuration of the web browser used for standard
and SSL communication. When these settings are changed, iLO initiates a reset to activate the
changes.
1. Navigate to the Administration→Access Settings page.
2. Click the Access Settings tab.
3. Update the service settings as needed.
4. To end your browser connection and restart iLO, click Apply.
It might take several minutes before you can re-establish a connection.
Service settings
iLO access settings 61