Installation Manual

Access options
You can configure the following settings in the Access Options section on the Access Settings
page.
Idle Connection Timeout (minutes)
This setting specifies how long a user can be inactive before an iLO web interface or Remote
Console session ends automatically.
The iLO web interface and the Remote Console track idle time separately because each
connection is a separate session. This setting has no effect on a Remote Console session if a
Virtual Media device is connected.
The following values are valid:
• 15, 30, 60, or 120 minutes—The default value is 30 minutes.
• Infinite—Inactive users are not logged out.
Failure to log out of iLO by either browsing to a different site or closing the browser also results
in an idle connection. The iLO firmware supports a finite number of connections. Misuse of the
Infinite timeout option might make iLO inaccessible to other users. Idle connections are recycled
after they time out.
This setting applies to local and directory users. Directory server timeout settings might preempt
the iLO setting.
Changes to the setting might not take effect immediately in current user sessions, but will be
enforced immediately in all new sessions.
iLO Functionality
This setting specifies whether iLO functionality is available.
Configuring iLO access options 63