Installation Manual

The key must be a 2,048-bit DSA or RSA key.
8. Click Import Public Key.
More information
SSH keys
Authorizing a new SSH key by using the CLI
Prerequisites
Administer User Accounts privilege
Authorizing a new key with the CLI
1. Generate a 2,048-bit DSA or RSA SSH key by using ssh-keygen, puttygen.exe, or
another SSH key utility.
2. Create the key.pub file.
3. Verify that Secure Shell (SSH) Access is enabled on the Access Settings page.
4. Use Putty.exe to open an SSH session using port 22.
5. Change to the cd /Map1/Config1 directory.
6. Enter the following command:
load sshkey type "oemhp_loadSSHkey -source
<protocol://username:password@hostname:port/filename>"
When you use this command:
• The protocol value is required and must be HTTP or HTTPS.
• The hostname and filename values are required.
• The username:password and port values are optional.
• oemhp_loadSSHkey is case-sensitive.
The CLI performs a cursory syntax verification of the values you enter. Visually verify that the
URL is valid. The following example shows the command structure:
oemhp_loadSSHkey -source http://192.168.1.1/images/path/sshkey.pub
More information
SSH keys
72 Configuring the iLO security features