Specification Sheet
QuickSpecs
HP ProLiant DL360p Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
c04123167 – DA – 14211 Worldwide — Version 64 — September 28, 2015
Page 21
NOTE: With new options available for Networking solutions and Rack Rail Kits these
options are no longer standard on-board with this Model Part Number. Please see
the Networking and HP Rack Options below for optional required options.
HP ProLiant DL360p Gen8 10 SFF Configure-to-order Server
666532-B21
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
Drive Cage - 10-Small Form Factor
NOTE: The 10 SFF drive cage requires cache with the P420i order to function
properly. 24 DIMM slots for RDIMM, UDIMM and HDIMM SmartMemory installation
NOTE: LRDIMMs cannot be used in the 10 SFF drive configuration.
(1) FlexibleLOM connection point: (see Step2: HP FlexibleLOM NIC section below for
NIC choices to populate the embedded connector)
Smart Array P420i Controller (Cache connection for 512MB, 1GB and 2GB FBWC
options)
NOTE: A cache module is required for the P420i when used with the 10 SFF drive
cage.
I/O slots - 2 Slots come standard:
Slot 1 - Low Profile x 8 PCIe 3.0
Slot 2 - Full-Height/Half-Length x 16 PCIe 3.0
System Fans - 6 (2 additional fans included with second processor)
USB - 4 Rear, 2 Front, 1 Internal
1 Internal SD slot
On System Server Management Processor - HP iLO 4 (embedded)
SID - System Insight Display(Active Health Indicator)
Power Supply not included - choose from Power Options section
NOTE: With new options available for Networking solutions and Rack Rail Kits these
options are no longer standard on-board with this Model Part Number. Please see
the Networking and HP Rack Options below for optional required options.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21
NOTE: The first processor selected should be the xxxxxx-L21 part
FIO Entry Processors - E5-2600 v2 series Processors
NOTE: All support up to 1333MHz memory speeds.
NOTE: Is a FIO (Factory integrated option) only
HP DL360p Gen8 Intel® Xeon® E5-2609v2 (2.5GHz/4-core/10MB/80W) FIO Processor
Kit
712741-L21
HP DL360p Gen8 Intel® Xeon® E5-2603v2 (1.8GHz/4-core/10MB/80W) FIO Processor
Kit
712743-L21
FIO Base Processors - E5-2600 v2 series Processors
NOTE: All support up to1600MHz DDR3 memory speeds.
NOTE: Is a FIO (Factory integrated option) only
HP DL360p Gen8 Intel® Xeon® E5-2640v2 (2.0GHz/8-core/20MB/95W) FIO Processor
Kit
712731-L21
HP DL360p Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) FIO Processor
Kit
712733-L21
HP DL360p Gen8 Intel® Xeon® E5-2620v2 (2.1GHz/6-core/15MB/80W) FIO Processor
712735-L21
Retired