Specification Sheet

QuickSpecs
HP ProLiant DL360p Generation 8 (Gen8)
Standard Features
c04123167 – DA – 14211 Worldwide — Version 64 — September 28, 2015
Page 5
Memory Configuration Tool at: http://www.hp.com/go/ddr3memory-configurator.
Network Controller
One of the following
depending on model
HP ProLiant Gen8 servers offer a new networking technology - Flexible Network Technology. The HP
ProLiant DL360p Gen8 server offers the customer the choice of 1 Gigabit and/or 10 Gigabit networking
solutions. For additional details see the Networking Section of this document.
Entry Models
HP Ethernet 1Gb 4-port 331FLR Adapter
Base Models
HP Ethernet 1Gb 4-port 331FLR Adapter
Performance Models
One of the following
depending on model
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 10Gb 2-port 533FLR Adapter
Energy Star Certified
Models
HP Ethernet 1Gb 4-port 331FLR Adapter
Expansion Slots
Expansion Slots
#
Technology
Bus
Width*
Connector
Width
Form Factor
Notes
1
PCIe 3.0
x8
x8
Low profile slot
Activated when
installed with
processor 1
2
PCIe 3.0
x16
x16
Full-height,
half-length slot
Activated when
installed with
processor 1
*Indicates the number of physical electrical lanes running to the connector.
NOTE: Two PCIe 3.0 expansion slots: (1) Half-length, full-height slot and (1) low-profile slot.
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This
signature is verified before the flash process starts, reducing accidental programming and preventing
malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting
from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the
operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log
(IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
 Processor and chipset status registers
 System memory, memory map, and memory initialization
 System hardware configuration (Integrated PCI devices and optional PCIe cards).
 Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/rbsu.
Storage Controller
One of the following
Entry Models
HP Smart Array P420i/ZM (RAID 0/1/1+0)
Base Models
HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Retired