Specification Sheet

QuickSpecs
HP ProLiant DL360p Generation 8 (Gen8)
Additional Options
c04123167 – DA – 14211 Worldwide — Version 64 — September 28, 2015
Page 51
HP USB Remote Access Key for G3 KVM Console Switches
AF650A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html
(Worldwide)
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
AF619A
HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter
AF629A
KVM USB Cnsl Itfc Adapter 1PK ALL
336047-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html
(Worldwide)
HP 1x4 USB/PS2 KVM Console Switch
HP 1x4 USB/PS2 KVM Console Switch
AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
AF622A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
Rail Kits
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server
to help you with the installation of your Gen8 server.
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the
server. Customers have the option to purchase their server without a rail kit.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools
and number of people to use for any installation.
HP 1U Small Form Factor Easy Install Rail Kit
NOTE: For SFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After
the rails are installed the server is aligned with the rails and slid into the rack. The HP
1U Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools
and number of people to use for any installation.
734807-B21
HP 1U Cable Management Arm for Easy Install Rail Kit
NOTE: Supports Easy Install rail kits only
734811-B21
HP 1U Small Form Factor Ball Bearing Rail Kit
NOTE: For SFF models.
NOTE: HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit ships standard with some
BTO Preconfigured Channel Models.
663201-B21
HP 1U Cable Management Arm for Ball Bearing Rail Kit
NOTE: The HP 1U Gen8 Cable Management Arm is optional for the SFF and LFF Ball
Bearing Rail Kits and is not available for use with the Friction Rail Kit.
663203-B21
HP 1U Large Form Factor Ball Bearing Rail Kit
NOTE: For LFF models.
663202-B21
Retired