HP Proliant DL360p Gen8 Carrier-Grade Server Read Before Install Carrier-Grade Instructions ** HP Part Number: 707961-001 Published: August 2012 Edition: 1
© Copyright 2010, 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. NEBS™ is a trademark of Telecordia Technologies Incorporated.
Contents 1 Converting to Carrier-Grade........................................................................4 2 Cabling....................................................................................................5 Cable Information.....................................................................................................................5 Grounding...............................................................................................................................
1 Converting to Carrier-Grade This document provides conversion instructions and product-specific information for the carrier-grade version of the HP ProLiant DL360p Gen8 Server.
2 Cabling Cable Information This section provides cabling information for installing the HP ProLiant DL360p Gen8 Carrier-Grade Server. Grounding This carrier-grade product is intended for use in both common bonding networks and isolated bonding networks. Grounding must comply with local, national, and other applicable government codes and regulations. Dedicated safety grounds are implemented on both the AC and DC versions of this product.
3 Power Supply and Cable Information Replacing the Fans and Power Supply If a cooling fan or power supply fails, you must replace it. Replacement usually takes no longer than five (5) minutes. For instructions on replacing these components, see the HP Proliant DL360p Gen8 Server Maintenance and Service Guide on the HP website: http://www.hp.com/go/hpsc Enter a product name, or select Servers, and then selectProliant /tc series servers. Select your product, and then click Manuals under Knowledge Base.
AC Power Supply Table 3 AC Power Supply Specifications Description Value HP 750W AC CS Platinum Plus Power Supply Kit 656363-B21 Input Voltage Range (V rms) 100–240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 200 208 220 230 240 Maximum Rated Output Wattage Rating (W) 750 750 750 750 750 750 750 Nominal Input Current (A rms) 8.5 7.0 4.1 3.9 3.7 3.6 3.
4 Changing the Settings on the System Maintenance Switch WARNING! To prevent personal injury from hazardous energy, remove watches, rings, or other metal objects. Preventing Electrostatic Discharge To prevent damage to the system, you must take precautions when setting up the system or the handling of parts. A discharge of static electricity from a finger or other conductor might damage system boards or other static sensitive devices. This type of damage can reduce the life expectancy of the device.
Verifying the System Maintenance Switch Setting After you switch the setting, you must verify that position #10 on the system maintenance switch is in the ON position. NOTE: The following instructions which verify the thresholds are correct, use HP Integrity iLO4. For complete information and instructions using iLO4, see the HP iLO 4 User Guide at the following HP website: http://www.hp.com/go/ilo/docs 1. 2. 3. Log in to iLO4. For instructions, see the HP Integrated Lights-Out 4 User Guide.
5 Installing the ProLiant DL360p Gen8 Server into a Seismic Rack For information on the installation of the ProLiant DL360p Gen8 server using the commercial rack mount kit, see the HP website: http://www.hp.com/go/hpsc Enter a product name, or select Servers, and then selectProliant /tc series servers. Select your product, and then click Manuals under Knowledge Base. You may need to click through more than one page of manuals to find a specific one.
