HP ProLiant DL360p Gen8 Server Maintenance and Service Guide

Component identification 84
Systems Insight Display LEDs
The HP Systems Insight Display LEDs represent the system board layout. The display provides status for all
internal LEDs and enables diagnosis with the access panel installed. To view the LEDs, access the HP Systems
Insight Display (on page 26).
Description Status
Processor LEDs
Off = Normal
Amber = Failed processor
DIMM LEDs
Off = Normal
Amber = Failed DIMM or configuration issue
Fan LEDs
Off = Normal
Amber = Failed fan or missing fan
NIC LEDs
Off = No link to network
Solid green = Network link
Flashing green = Network link with activity
If power is off, the front panel LED is not active. For status,
see "Rear panel LEDS and buttons (on page 80)."
Power supply LEDs
Off = Normal
Amber = Failed power supply
PCI riser LED
Off = Normal
Amber = Incorrectly installed PCI riser board
Over temp LED
Off = Normal
Amber = High system temperature detected
AMP status LED
Off = Disabled
Solid green = Advanced Memory Protection active
Solid amber = Memory failure has occurred.
Flashing amber = Invalid AMP memory configuration
Power cap LED
Off = System is in standby, or no cap is set.
Solid green = Power cap applied
For more information, see "Systems Insight Display LED combinations (on page 85)."