HP Smart Update Manager 5.3.5 Release Notes (Ed. 3)
available on the HP Online Depot website at http://vibsdepot.hp.com/. For more information on the
firmware updates available in the HP SPP, see the HP Service Pack for ProLiant Release Notes.
Supported switches
HP SUM supports the following switches:
• Brocade
16Gb
Minimum supported firmware version: 7.0.0x
◦
Required firmware intermediate updates: 7.0.0x > 7.0.1a
– HP SN3000B 16Gb 24/12 Fibre Channel Switch
– HP SN3000B 16Gb 24/24 Fibre Channel Switch
– SN6000B 16Gb 48-port/24-port active FC switch, Power Pack+
– SN6000B 16Gb 48-port/48-port active FC switch, Power Pack+
– SN8000B 8-slot SAN Backbone Director switch, Power Pack+
– SN8000B 4-slot SAN Director switch, Power Pack+
◦ 8Gb
Minimum supported firmware version: 6.3.2x
Required firmware intermediate firmware updates: 6.3.2x > 6.4.2b > 7.0.1a; 6.4.2x >
7.0.1a; 7.0.0x > 7.0.1a
– DC04 SAN Director Switch, Power Pack+
– DC SAN Backbone Director Switch Power Pack+
– 8/8 Base, SAN Switch
– 8/24 SAN Switch
– 8/40 SAN Switch, 8/40 Power Pack
– 8/80 SAN Switch, 8/80 Power Pack
– Encryption SAN Switch
– EVA4400 embedded switch module, 8Gb
– 8Gb SAN Switch for HP BladeSystem c-Class, 8/12c
– 8Gb SAN Switch for HP BladeSystem c-Class, 8/24c
– 8Gb SAN Switch for HP BladeSystem c-Class, 8/24c Power Pack+
– DC SAN director multiprotocol extension blade
– DC SAN director 10/24 FCoE blade
– DC switch encryption FC blade
– 2408 FCoE Converged network switch
– 1606 Extension SAN switch
◦ 4Gb (larger Compact Flash)
Minimum supported firmware version: 6.2x
Required firmware intermediate firmware updates: 6.2.x > 6.3.2d > 6.4.2b; 6.3.x > 6.4.2b;
6.4.x > 6.4.2b
– SAN Switch 4/32 Base, 4/32 Full Fabric and 4/32 Power Pack
– SAN Switch 4/32B Base, 4/32B Full Fabric and 4/32B Power Pack
4 Operating systems and devices