HP Scripting Toolkit 9.00 for Linux User Guide

4. Load appropriate storage controller drivers:
modprobe -f cciss
5. Load the channel interface driver for iLO:
insmod /opt/hp/hp-ilo/bin/`uname -r`/hp_ilo.ko
6. Mount the network share:
mkdir /mnt/toolkit_share
7. Apply the system BIOS configuration using the CONREP utility:
./conrep -l -f/mnt/toolkit_share/data_files/conrep.dat
8. Apply the Smart Array configuration using the ACU utility:
cd /mnt/toolkit_share/utilities/hpacuscripting
9. Apply the iLO configuration using the HPONCFG utility:
cd /mnt/toolkit_share/utilities
10. Unmount the network share:
umount /mnt/toolkit_share
11. Insert the operating system CD.
12. Reboot the server to run the operating system installation.
Installing the operating system
For information on performing an unattended operating system installation, see “Booting and OS
installation” (page 11). For additional information, see the following resources:
• Operating system documentation
• Kickstart or AutoYAST documentation
10 Deployment using the Scripting Toolkit