HP Insight Diagnostics 9.0 User Guide
Table Of Contents
- User Guide
- Contents
- 1 HP Insight Diagnostics overview
- 2 Getting started
- Installing the Online Edition
- Starting the Online Edition
- Starting HP Insight Diagnostics for Windows Online Edition
- Starting HP Insight Diagnostics for Linux Online Edition from the HP System Management Homepage
- Starting the Online Edition from a browser
- Modifying browser settings on a Linux server
- Starting the Online Edition from Microsoft Internet Explorer
- Starting the Online Edition from Firefox
- Using the Online Edition from a command line
- Using HP Insight Diagnostics commands in Linux
- Using HP Insight Diagnostics commands in Windows
- Starting the Offline Edition
- 3 Using HP Insight Diagnostics
- 4 Troubleshooting
- Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Registering for software technical support and update service
- HP authorized resellers
- Documentation feedback
- New and changed information in this edition
- Related information
- Related documentation
- HP websites
- HP Support Center
- Support and drivers
- Typographic conventions
- A Acronyms and abbreviations
- Index
Figure 2 Press F10 key for Intelligent Provisioning
3. On the blue menu screen, press Enter.
NOTE: If HP Insight Diagnostics is listed in this menu, you can skip Step 4 through Step 5
as well you can use the down arrow key to select that option, then press Enter.
If you are using Intelligent Provisioning for the first time, you see screens prompting you to
configure the keyboard, networking, etc. After you have completed the configuration, these
screens are skipped the next time you use Intelligent Provisioning, and you are taken directly
to the Home screen.
4. On the Home screen, click on the Perform Maintenance con.
Figure 3 Select Perform Maintenance
Starting the Offline Edition 13