HP Insight Diagnostics 9.0 User Guide
Table Of Contents
- User Guide
- Contents
- 1 HP Insight Diagnostics overview
- 2 Getting started
- Installing the Online Edition
- Starting the Online Edition
- Starting HP Insight Diagnostics for Windows Online Edition
- Starting HP Insight Diagnostics for Linux Online Edition from the HP System Management Homepage
- Starting the Online Edition from a browser
- Modifying browser settings on a Linux server
- Starting the Online Edition from Microsoft Internet Explorer
- Starting the Online Edition from Firefox
- Using the Online Edition from a command line
- Using HP Insight Diagnostics commands in Linux
- Using HP Insight Diagnostics commands in Windows
- Starting the Offline Edition
- 3 Using HP Insight Diagnostics
- 4 Troubleshooting
- Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Registering for software technical support and update service
- HP authorized resellers
- Documentation feedback
- New and changed information in this edition
- Related information
- Related documentation
- HP websites
- HP Support Center
- Support and drivers
- Typographic conventions
- A Acronyms and abbreviations
- Index
5. Select the device to test:
• Select the All Devices check box to test all devices.
• Select the check box for one or more devices to test specific devices.
6. Click Begin Testing.
Figure 9 Test tab – Quick Test
The Status tab displays test progress. The logs, on the Log tab, display detailed test results.
Running a Complete Test
1. Click Complete Test.
2. Select the test mode:
• Interactive runs all tests, some of which require user input.
• Unattended runs the tests that do not require user input.
3. Select the test duration:
• Loops runs the test for the specified number of test cycles.
• Total Test Time (minutes) runs the test for the specified length of time.
4. Click Stop on First Error to stop all tests if an error occurs.
5. Select the device to test:
• Select All Devices to test all devices.
• Select the check box for one or more devices to test specific devices.
6. Click Begin Testing.
Using the Test tab (HP Insight Diagnostics Offline Edition only) 21