HP Insight Diagnostics 9.0 User Guide
Table Of Contents
- User Guide
- Contents
- 1 HP Insight Diagnostics overview
- 2 Getting started
- Installing the Online Edition
- Starting the Online Edition
- Starting HP Insight Diagnostics for Windows Online Edition
- Starting HP Insight Diagnostics for Linux Online Edition from the HP System Management Homepage
- Starting the Online Edition from a browser
- Modifying browser settings on a Linux server
- Starting the Online Edition from Microsoft Internet Explorer
- Starting the Online Edition from Firefox
- Using the Online Edition from a command line
- Using HP Insight Diagnostics commands in Linux
- Using HP Insight Diagnostics commands in Windows
- Starting the Offline Edition
- 3 Using HP Insight Diagnostics
- 4 Troubleshooting
- Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Registering for software technical support and update service
- HP authorized resellers
- Documentation feedback
- New and changed information in this edition
- Related information
- Related documentation
- HP websites
- HP Support Center
- Support and drivers
- Typographic conventions
- A Acronyms and abbreviations
- Index
Figure 10 Test tab – Complete Test
The Status tab displays test progress. The logs, on the Log tab, display detailed test results.
Running a Custom Test
1. Click Custom Test.
2. Select the test mode:
• Interactive runs all tests, some of which require user input.
• Unattended runs the tests that do not require user input.
3. Select the test duration:
• Loops runs the test for the specified number of test cycles.
• Total Test Time (minutes) runs the test for the specified length of time.
4. Click Stop on First Error to stop all tests if an error occurs.
5. Select the device and tests:
• Click Check All to run all device-specific tests.
• Click Uncheck All to clear any check boxes that are selected.
• Click Expand to view the available device-specific tests, and then select the check box
for tests to run. Click on the test to enable any parameter updates/changes. Edits to the
parameters can be made in the window on the right of the screen.
6. Click Begin Testing.
22 Using HP Insight Diagnostics