ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide

Setup and Installation of the Packaged Cluster
Installing the Servers into the Rack
Follow the steps in this section if you are installing the server into a Compaq or
HP 7000-, 9000-, or 10,000-series rack or a third-party rack with square holes. If you
are installing the server in an HP Rack System/E and HP Systems round-hole rack or
a third-party rack with round holes, or if the supplied rails do not fit the square-hole
rack you are using, order the third-party option kit for racks with round holes and use
the installation instructions that ship with the option kit.
1. Locate the following materials necessary for installing the servers.
Table 2-10: Rack Mounting Hardware and Template
Item Description
1 Left and right standard rack rail assemblies
2 Server rails
3 Rack template
4 Cable management arm
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 2-27
HP CONFIDENTIAL Codename: Sopwith Part Number: 252621-002 Last Saved On: 11/8/02 1:59 PM