HP ProLiant DL380 G4 Storage Server Installation Guide (WSS R2 version, March 2006)

7. On the Internet Options dialog box, click OK to ﬁnish.

To connect the storage server to a ne twork using the remote browser

method

1. On the remote client machine open Internet Explorer and

enter https:// and the serial number of the storage server

followedbyahyphen(-),andthen:3202. For example,

https://D4059ABC3433-:3202 Press Enter.

NOTE:

You can substitute the IP address for the serial number, if

you are connected through DHCP.

2. Click OK on the Sec urity Aler t prompt.

3. Log in to the HP ProLiant Storage Server Management console with the

default user name administrator and the password hpinvent.

NOTE:

You can change the administrator name and password

when you conﬁgure the server using the "Rapid Startup

Wiz ard" on page 42.

4. To complete network conﬁguration using the Rapid Startup Wiz ard,

see "Conﬁguring the server on the network"onpage39.

IMPORTAN T:

If you are using the r emote browser method to access the HP Storage

Server Management console and Rapid Startup Wizard, always close

the remote session before closing your Internet browser. Closing the

Internet br owser does not close the remote session. Failure to close your

remote session impacts the limited number of remote sessi ons allowed on

the storage server at any given time.

Using the Remote desktop method

To connect the storage server to a network using the remote desktop

method

1. On the PC client, select Start > Run.AtOpen,typemstsc,thenclick

OK.

Accessing the HP Storage Server Management console