HP ProLiant DL380 G4 Storage Server Installation Guide (WSS R2 version, March 2006)

4Configuring the ser ver on the
network
Before you begin
When first powering on the storage server you need to have some
configuration data readily available to complete the Rapid Startup Wiz ard.
Complete the Server configuration worksheet and use the data collected to
initialize the storage server.
Table 4 Server configuration worksheet
Configuration Worksheet
Administrative Identity
User name
Change system administrator’s user
name, which is set by default to
administrator.
User password Change system administrator’s password,
which is set by default to hpinvent.
Alert E-mail Notification
E-mail address
alert sent to
E-mail address for critical, warning, or
informational messages about server
status.
E-mail address
alertsentfrom
Must be a valid, well-formed e-mail
address that will appear as the sender of
server status e-mail alerts.
SMTP server
name or IP
address
Must be an e-mail server on your network
that supports the Simple Mail Transfer
Protocol (SMTP).
SNMP Settings (to be completed only if needed)
Contact person
System administrator for the storage
server. The contact and location will be
provided to any SNMP management
computer that requests them.
HPProLiantDL380G4StorageServerinstallationguide
39