HP SATA DVD-ROM Optical Drive Installation Instructions for HP ProLiant Servers

HP SATA DVD-ROM Optical

Drive

Installation Instructions

for HP ProLiant servers

Overview

This document provides instructions for installing the HP SATA

DVD-ROM optical drive.

The HP SATA DVD-ROM optical drive provides optical media read

capability for HP ProLiant servers. The primary purpose of the drive is

data access.

For more information about this product, see the HP website

(http://www.hp.com).

Installing the drive

CAUTION: To prevent damage to electrical components,

properly ground the server before beginning any

installation procedure. Improper grounding can cause

electrostatic discharge.

For more information on installing the drive in a specific server, see the

documentation provided with the server.

To install the component:

1. Power down the server as indicated in the server-specific user

documentation.

2. Disconnect the power cord from the power supply to remove

power from the server and all peripheral devices.

3. Remove components that prevent access to the removable-media

drive bays.

4. Install the drive.

5. If needed, secure with the appropriate fasteners.

6. Install all components removed from the server.

7. Connect the power cord to the server, and then connect it to a

properly grounded electrical outlet.

8. Power up the server.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Bluetooth is a trademark owned by its proprietor and used by Hewlett-

Packard

Company under license.

Part Number: 453281-003

June 2011

Edition: 3

*453281-003*

453281-003

PAGE 1
HP SATA DVD-ROM Optical Drive Installation Instructions for HP ProLiant servers Overview This document provides instructions for installing the HP SATA DVD-ROM optical drive. The HP SATA DVD-ROM optical drive provides optical media read capability for HP ProLiant servers. The primary purpose of the drive is data access. For more information about this product, see the HP website (http://www.hp.com).
PAGE 2
Laser compliance (optical devices) This device contains a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation. Each laser product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007; and with IEC 60825-1:2007.