HP ProLiant Storage Server SAN Connection and Management Application Notes (5697-6495, September 2007)
XP128
XP1024
Driver SCSIPORT Driver StorPort Firmware BootBIOS
FC2143
(LP1150)
FC2243
(LP11002)
5–5.30a2 5–1.20a7 2.1 0a 1 0 1.71a0 (5.02a1 )
FCA2214
(QLA2340)
FCA2214DC
(QLA2342 )
9.1.3.11 9 .1.3.16
N/A
1. 45
FCA2404
(LP9802)
FCA2404DC
(LP9802DC)
5–5.20a10
5–1.11x1
1. 91 a 1 1. 71 a 3
LP10000
LP10000DC
5–5.30a2 5–12 0a7 1.91a5 1.71a0 (5.02a1)
FCA 2408 34073–B21 5–5.30a2 5–1.20a7 1.91a5 1.71a0 (5.02a1)
If you update the HBA driver version, firmware, or boot BIOS, be sure to reboot the system af ter the
update before you continue.
Contact HP
Service an d Support:
• To get the latest driver version, firmware, or boot BIOS for HBA drivers
• If your HBA PCI cards are not listed in “Table 4”and“Table 5”
2. Verify th
at the firmware revision for the XP array is installed.
XP 128/1024 firmware revision: 21.14.30.00/00
XP 10000/
12000 firmware
revision
:
50.09.07.00/00
Contact HP Service and Support to obtain the latest firmware version for your storage array.
If you update the firmware, be sure to reboot the system af ter the update before you continue.
3. Install
multipath software (SecurePath or HP MPIO DSM) .
HP SecurePath
version:
4.0C SP1 and 4 .0C SP2–1
HP MPIO
version:
Full featured DSM for Windows XP v2.00.01
Windows with XP storage requires the installation of HP Stora g eWorks multipathing software on
each host to achieve high-availability, multiple-path capability.
To obtain H P StorageWorks SecurePath, go to h
ttp://www.hp.com/go/SecurePa th.Rebootthe
system after the software installation before you continue.
HP MPIO users can obtain the software from h
ttp://h18006.www1.h p.com/products/sanworks/
multipathoptions/index.html.
IMPORTANT:
Review the MPIO documentation (readme and installation instructions). Review important
information concerning the HP MPIO DSM (prerequisites, system requirements, important
notes, and considerations) before you begin the installation process. For all XP storage
arrays, you must install MPIO software. Currently, two software MPIOs are supported for
these storage arrays: HP StorageW orks SecurePath and HP MPIO DSM.
4. Connect the appropriate fiber cables to the HBA cards.
10