Implementing Microsoft Windows Server 2008 on HP ProLiant servers

WHEA support is enabled for the following servers. (See

Table 2 for ROM details for these servers):

• ProLiant BL servers:

– ProLiant BL460c

– ProLiant BL465c

– ProLiant BL480c

– ProLiant BL680c G5

– ProLiant BL685c

• ProLiant DL servers:

– ProLiant DL360 G5

– ProLiant DL365

– ProLiant DL380 G5

– ProLiant DL385 G2

– ProLiant DL580 G5

– ProLiant DL585 G2

• ProLiant ML servers:

– ProLiant ML350 G5

– ProLiant ML370 G5

For additional information about WHEA, visit the Microsoft website:

www.microsoft.com/whdc/system/pnppwr/WHEA/default.mspx.

Supported configurations

Windows Server 2008 should load and run on any HP server listed in “Recommended system

platform” section of this document when the server meets the recommended hardware configuration

established by Microsoft.

Carefully review this document for the recommended system configuration and possible issues that

might be encountered. Do not use this paper as the sole source of information. In addition to the

websites mentioned throughout this paper, visit the Windows Server 2008 support page: