HP USB Floppy Drive Key Installation Instructions
Disconnecting the drive key
CAUTION: Data loss can result if the device is
disconnected improperly.
1. Close all drive key files and programs.
2. Double-click the Safely Remove Hardware icon or the
Unplug or Eject Hardware icon in the system tray.
3. Select USB Floppy Drive Key, and click Stop.
4. When the Safe to Remove Hardware message
appears, disconnect the drive key from the computer.
Some operating systems and user interfaces can vary on
how to disconnect the drive key.
Downloading user
documentation and drivers
DOWNLOAD INFORMATION
To download the latest user documentation and drivers:
1. Go to www.hp.com.
2. Click Support and Troubleshooting Information from the
left menu bar.
3. Type the product name in the product field and press
Enter.
4. Click Manuals from the Resources section or Download
Drivers and Software from the Tasks section.
Class B equipment
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit that is
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly
approved by Hewlett-Packard Company may void the user’s
authority to operate the equipment.
Declaration of conformity for
products marked with the FCC
logo, United States only
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
For questions regarding this product, contact us by mail or
telephone:
• Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
• 1-800-HP-INVENT (1-800-474-6836). (For continuous
quality improvement, calls may be recorded or
monitored.)
For questions regarding this FCC declaration, contact us by
mail or telephone:
• Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
• 1281-514-3333
To identify this product, refer to the part, series, or model
number found on the product.
Canadian notice
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
European Union regulatory
notice
This product complies with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 89/336/EEC
Compliance with these directives implies conformity to
applicable harmonized European standards (European
Norms) which are listed on the EU Declaration of Conformity
issued by Hewlett-Packard for this product or product family.
This compliance is indicated by the following conformity
marking placed on the product: