HP ProLiant DL380e Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 57
5.
Disconnect all cables connected to the expansion board.
6. Lift the release tabs, and then rotate them 180° counterclockwise.
7. Lift the PCI riser cage to unseat the PCI riser boards.
o Primary PCI riser cage
o Secondary PCI riser cage (optional)
To replace the component, reverse the removal procedure.
GPU retaining bracket
To remove the component:
1. Power down the server (on page 31).
2. Remove all power:
a. Disconnect each power cord from the power source.