HP ProLiant DL380e Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 58
b.
Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 32).
o Remove the server from the rack (on page 34).
4. Remove the access panel ("Access panel" on page 37).
5. Remove the PCI riser cage ("PCI riser cage" on page 56).
6. Remove the GPU retaining bracket:
o GPU retaining bracket for the primary PCI riser cage
o GPU retaining bracket for the secondary PCI riser cage
To replace the component, reverse the removal procedure.