HP Scripting Toolkit 9.60 for Windows User Guide

IOCabinet [N],IOBay [N],IOChassis [N],Slot [N],Cabinet [N],Cell [N]

ClearConfigurationWithDataLoss = Yes|No ; COMMENT: This option is now

deprecated.

LicenseKey = XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

DeleteLicenseKey = XXXXX-XXXXX-XXXXX-XXXXX-XXXXX | * ; COMMENT: *

is a wild card that enables you to delete all license keys on the

specified controller.

RAIDArrayID = “XXXXXXXXXXXXXXXXXXXX”

ReadCache = 0|10|20|25|30|40|50|60|70|75|80|90|100

WriteCache = 0|10|20|25|30|40|50|60|70|75|80|90|100

RebuildPriority = Low|Medium|High

ExpandPriority = Low|Medium|High

SurfaceScanDelay = N

SSPState = Enable|Disable

PreferredPathMode = Auto|Manual

; COMMENT: the following five entries are used to optimize the

controller performance for video

MNPDelay = 0|1|2|...|60 ; units are minutes, zero indicates disabled

IRPEnable = Yes|No

DPOEnable = Yes|No

ElevatorSortEnable = Yes|No

QueueDepth = 2|4|8|16|32|Auto

Array = A|B|C|D|E|F|G|...Z|a|b|c|d|e|f

OnlineSpare = None | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |

Port:Box:Bay,Port:Box:Bay,... ; COMMENT: These values are available

only in Custom method mode. In Auto method mode, the choices are

Yes|No.

Drive = * | N | Port:ID,Port:ID... | Box:Bay,Box:Bay... |

Port:Box:Bay,Port:Box:Bay,...

DriveType = SCSI | SAS | SATA

LogicalDrive = 1|2|3|...32

RAID = 0|1|5|50|6|60|adg|auto ; COMMENT: RAID 6 and 60 are only

available when SAAP is installed and the license key registered

ParityGroups = 2|N ; COMMENT: Necessary only for RAID 50 or 60. N

> 2

Size = [N]|Max

Sectors = 32|63

StripeSize = 8|16|32|64|128|256

ArrayAccelerator = Enable|Disable

LogicalDriveSSPState = Enable|Disable

SSPAdaptersWithAccess = [N],[N]...|None

PreferredPath = 1|2

HBA_WW_ID = WWN

32 Scripting Toolkit utilities