HP Smart Update Manager 5.1 Release Notes
NOTE: When attempting to use the remote deployment functionality of HP SUM on any edition
of Windows Server 2008, Windows Vista, or Windows 7, you must ensure that the File and Print
Services feature is enabled and that the File and Print Services exception has been enabled in
the Windows firewall. Failure to do so prevents HP SUM from deploying to remote Windows
targets.
• Enable the network ports that HP SUM uses. For more information, see the Enabling ports section
in the HP Smart Update Manager User Guide.
Minimum requirements for Linux servers
To successfully use HP SUM to perform dependency checks on targets running a Linux operating system,
the following must be available:
• A local administrative system with at least 1 GB of memory
NOTE: The HP SPP or HP Integrity Smart Update firmware bundle that delivered HP SUM might
require more memory than HP SUM. Check the release notes for those products for information
on the memory requirements.
• glibc 2.2.4-26 or later
• gawk 3.1.0-3 or later
• sed 3.02-10 or later
• pciutils-2.1.8-25.i386.rpm or later
Be sure that the following platform-specific compatibility libraries are also installed.
• For Red Hat Enterprise Linux 5 x86 servers:
◦ libnl (required for QLogic and Emulex drivers and firmware)
• For Red Hat Enterprise Linux 5 AMD64/EM64T servers:
◦ libnl (required for QLogic and Emulex drivers and firmware)
• For SUSE Linux Enterprise Server 10 x86 servers:
◦ libnl (required for QLogic and Emulex drivers and firmware)
• For SLES 10 AMD64/EM64T servers:
libnl (required for QLogic and Emulex drivers and firmware)◦
◦ e2fsprogs-32bit
NOTE: This library is graphical only, however, it is required to use HP SUM in Console mode.
◦ fontconfig-32bit
• For SLES 11 x86 servers:
libstdc++33-3.3.3-11.9.i586 or later◦
◦ libnl (required for QLogic and Emulex drivers and firmware)
• For SLES 11 AMD64/EM64T servers:
libstdc++33-32bit-3.3.3-11.9 or later◦
◦ libnl (required for QLogic and Emulex drivers and firmware)
6 Prerequisites