3.7.0 HP StorageWorks MxDB-Oracle-HiAv installation and administration guide HP MxDB-Oracle-HiAv for Linux (AG513-96009, June 2009)

If you want to execute the GUI from other nodes, copy the /etc/oratab entry for
PILOT that you just created to the other nodes. At this point the PILOT database will
be running. From now on, you will use this GUI or the corresponding CLI command
to start and stop the database. (For more information, see Database
operations, page 40.)
Exit the GUI by clicking the X in the upper right-hand corner.
Configuration and Operations32