3.7.0 HP StorageWorks MxDB-Oracle-HiAv installation and administration guide HP MxDB-Oracle-HiAv for Linux (AG513-96009, June 2009)

the old primary node (10.10.60.18) and starts it on the new primary node
(10.10.60.17).
mxdb -d PROD -m “10.10.60.17:10.10.60.16:10.10.60.18”
The -m option specifies the IP addresses of the primary and backup servers. The first
server listed is the primary, the next server is the first backup, and so on. Use colons
to separate the server addresses.
Add or remove nodes
As long as the primary node is not changed, nodes can be added or removed from
the Virtual Oracle Service configuration without impacting the running database.
If the primary node is changed as a result of adding or removing nodes,
MxDB-Oracle-HiAv will stop the database on the old primary node and restart it on
the new primary node.
GUI procedure
On the Application window, use the arrows to move the nodes between the Available
Nodes and Selected Nodes columns, adding or removing nodes from the Virtual
Oracle Service. You can also reorder the nodes in the Selected Nodes list as
necessary. Then click Apply. In the following example, we will add node 10.10.60.16
to the configuration of the Virtual Oracle Server and then reorder the backups in the
Selected Nodes column.
Configuration and Operations46