HP StorageWorks Clustered Gateway (software-only) 3.6.0 Windows Storage Server Edition Upgrade Guide (433702-002, January 2008)

Chapter 3: Rolling Upgrades 14
9. If you installed a new HBA driver in step 8, reboot the server.
10. If you upgraded the operating system, run the mxcheck utility
provided with HP Clustered File System 3.6.0. This utility verifies that
the server’s configuration meets the requirements for running HP
Clustered File System. Insert the HP Clustered File System CD into the
CD drive or go to the directory where you downloaded the product
and then double-click the file mxcheck.exe. Output from the utility
appears on the screen and is also written to the Application Log
section of the Event Viewer. We recommend that you fix any problems
identified by mxcheck before you install HP Clustered File System.
11. Install HP Clustered File System 3.6.0. Locate the file
MxS_3.6.0.<xxxx>.msi on the product CD or in the directory where you
downloaded the software. Double-click on the MxS_3.6.0.<xxxx>.msi
file and run the Installation Wizard. To complete the installation,
reboot the server as directed by the popup message.
12. Install FS Option for Windows. Insert the product CD into the CD
drive, or go to the location where you have downloaded the software.
Then double-click the file MxFS_3.4.0.<xxxx>.msi and run the
Installation Wizard.
13. Restore the HP Clustered File System configuration that you saved in
step 3. Be sure to copy the \conf directory back to its original location:
%Program Files%\Hewlett-Packard\HP Clustered File System\conf.
14. Start the HP CFS Management Console and enter the login credentials
for the server that you are upgrading. Click the down arrow on the
Connect button to see the options, and then click on Configure.
15. Install the new license file. Select Tools > Configuration Utility, and
then select Change License File and install the new license.
16. Click Apply (on the bottom of the Cluster Configuration window) to
save the HP Clustered File System configuration.