HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter3:SettingUpHPStorageWorksClusteredFileSystem 20
•TheIPaddressorhostnameofeachFibreChannelswitchthatis
includedintheSAN.(ThisstepisrequiredforFibreChannelswitch‐
basedfencingandoptionalforWebManagement‐basedfencingvia
serverreset/shutdown.)
•ThepartitionsorLUNsthatyouwanttouseformembership
partitions.
•Ifyouwillbeusingthe
snapshotfeature,informationaboutthe
appropriatesnapshotmethod.
Connect to the Management Console
Ononeserver,selectStart>Programs>HPClusteredGateway>HPCFS
ManagementConsole.OntheHPClusteredFileSystemConnectwindow
thatappearsnext,typetheIPaddressorhostnameoftheserverinthe
“Connectto”field.
Thenclickonthedown‐arrowontheConnectbutton.
Youwillseetwooptions:ConnectandConfigure.ClickConfigure.
NOTE: IfyouareloggedontoWindowsasauserthatisnotamemberof
themachinelocaladministratorsgrouponthetargetserver,click
theAsUserbuttonnexttothe“Connectto”field.Youwillthenbe
promptedforausernameandpassword.Afterspecifyingthe
credentials,click
ConfigureontheHPClusteredFileSystem
Connectdialog.
TheConfigureClusterwindownowappears.Youwillneedtospecify
informationonthetabsinthisorder:GeneralSettings,SAN&Fencing,
StorageSettings,Cluster‐WideConfiguration.
General Settings Tab
Thistabasksforgeneralinformationneededforclusteroperations.