HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter3:SettingUpHPStorageWorksClusteredFileSystem 22
Toinstallthelicense,clicktheChangeLicenseFilebutton.Typethe
locationofthelicensefileorusetheBrowsebuttontolocate it.By
default,thelicensefileisinstalledat\%SystemDrive%\Program
Files\Hewlett‐Packard\HPClusteredFileSystem\conf\licenses\.
3. SecretNetworkKey.Thispasswordisrequired.Itprovidesadditional
securityfornetworkcommunicationsamongtheclusterservers.To
setthiskey,clicktheSetSecretNetworkKeybutton.Youcanenter
anythingyouwantforthispassword,upto86charactersinlength.
NOTE: IfmorethanoneHPX5500StorageGatewayforWindows
clusterisrunningonthesamesubnet,besurethateachcluster
hasadifferentSecretNetworkKey.Thisstepensuresthatthe
multicasttrafficistargetedonlyatthe serverswiththesame
SecretNetworkKey.
4. ClusterAdministrativeTrafficProtocol
.Selecteithermulticastor
unicastmode.Multicastmodeisrecommended;however,ifyour
networkconfigurationdoesnotallowmulticasttrafficthroughthe
network,youcanuseunicastmode.
WhenyouhavecompletedthefieldsontheGeneralSettingstab,gotothe
SAN&Fencingtab.