HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter3:SettingUpHPStorageWorksClusteredFileSystem 30
RepeatthisproceduretospecifytheremainingFCswitches,including
cascadingswitches.
2. SNMPCommunityString.ThedefaultSNMPcommunity stringfor
HPClusteredFileSystemisprivate.Ifyouwanttouseacustom
communitystring,entertheappropriatevaluehere.TheSNMP
communitystringmustbesettothe
samevalueonHPClusteredFile
SystemandontheSANswitchesconfiguredabove.
WhentheSAN&Fencingtabiscomplete,gototheStorageSettingstab.
Storage Settings Tab
TheStorageSettingstaballowsyoutoselectmembershippartitions,
whichHPClusteredFileSystemusestocontrolaccesstotheSAN,and
to
createasnapshotconfigurationfortakinghardwaresnapshots.