HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter3:SettingUpHPStorageWorksClusteredFileSystem 33
Applytheconfiguration.WhenyouhavecompletedtheStorage
Settingstab,clickApply(atthebottomoftheClusterConfiguration
window)tosavetheconfigurationthatyouhavecreated.
Theconfigurationistheninstalledontheserverthatyouareusingto
connecttotheManagementConsole.Youwillthenbe
askedwhether
youwanttostarttheclusteronthatserver.IfyouconfiguredWeb
management‐basedfencing,answerNo.Otherwise,answerYes.
GototheCluster‐WideConfiguration tab.
Cluster Wide Configuration Tab
Thistabisusedtoexporttheclusterconfigurationtotheotherservers
thatwillbeinthecluster.Itcan
alsobeusedtostartorstopHPClustered
FileSystemonspecificservers.