HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter3:SettingUpHPStorageWorksClusteredFileSystem 35
WhenHPClusteredFileSystemisrunningonalloftheservers,youcan
closetheServerConfigurationwindow.
Theinstallationisnowcomplete.SeetheHPStorageWorksX5500Network
StorageGatewayforWindowsAdministrationGuideortheHPManagement
Consoleonlinehelpforinformationaboutconfiguringthecluster
components.
Test the Fencing Configuration
TheTestFencingbuttonontheClusterWideConfigurationtabcanbe
usedtoverifythatthefencingconfigurationiscorrectforeachserver.
Thisfeatureisparticularlyuseful forWebmanagement‐basedfencing.
OntheClusterWideConfigurationtab,selectoneormoreserverstotest
andclicktheTest
Fencingbutton.
HPClusteredFileSystemthenfencestheserversinaccordancewiththe
methodyouspecifiedontheSAN&Fencingtab.Ifthecorrectserveris
notfenced,youwillneedtochecktheconfiguration.Forexample,ifyou
specifiedapatternfortheRemoteManagementController,theserver

maynotbeconfiguredtousethatpattern.
IfanincorrecthostnameorIPaddresswasspecifiedfortheRemote
ManagementControllerassociatedwiththeserver,exportthecluster
configurationtothatserveragainandthensupplythecorrect
information.
Install the Stand-Alone Management
Console
Forconvenience,theclustercanbemanagedfromaseparate
administrativestationratherthanfromaserverinthecluster.Toallow
youtodothis,theManagementConsoleandmxutilityareprovidedina
separatepackage(mxconsole_3.6.1.<xxxx>.<arch>.msi)thatcanbeinstalled
onPCsoutsidethecluster.
System Requirements
Systemsmustmeettheserequirements: