HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter4:OtherProcedures 39
1. Stopallapplicationsusingthefilesystem.
2. RunthefollowingcommandattheCommandPrompt(thecommand 
isshownontwolinesforreadability):
%SystemDrive%\Program Files\Hewlett-Packard\Clustered
File System\bin\psfscheck -e enable8dot3 <device>
Thedevicecanbespecifiedinseveralways:
•Bythedriveletter,suchasX:
•Bythemountpoint(junction),suchasC:\san\vol2
•Bythepsdorpsvname,suchaspsd2p2orpsv3
3. Restarttheapplicationsthatusethefilesystem.
Usingtheextendedcharactersetin8.3filenamescanbeallowed
or
disallowedcluster‐wide.(Bydefault,itisdisallowed.)Usethefollowing
commandstoallowordisallowtheuseoftheextendedcharacterset.
Beforerunningthecommands,besurethatthevolumeisnotinuse.
psfscheck -e allowextchar
psfscheck -e disallowextchar
Youcancombineoptionsinasinglecommand.Forexample,youcan
specifyADS support,8.3support,andtheextendedcharacterset:
psfscheck -e enableads -e enable8dot3 -e allowextchar
<device>
Configure the XIOtech MAGNITUDE
Storage Array
ConfiguretheXIOtechMAGNITUDEstoragearraybeforeyouinstallHP
ClusteredFileSystem.
ThisstoragearraysupportsasecureLUNmaskingcapability.Thereare
twoprimarymodesofoperation:NoMapping/MaskingandNewServer
SeeNothing.Theconfigurationyouwillneedtoperformde pendson
whichmodeyouare using.