HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter4:OtherProcedures 42
b. WhentheConfigureClusterwindowopens,clickImport.Onthe
Importwindow,typetheIPaddressorDNSnameoftheserver
fromwhichyouwanttoimporttheconfiguration.

5. Addthenewservertothecluster.GototheClusterWide
Configurationtab.TheAddresslistshowstheservers
currentlyinthe
cluster.ClicktheAddbuttontoaddthenewservertothislist.You
willbeaskedfortheIPaddressorhostnameofthenewserver.When
theoperationiscomplete,thenewserverisdisplayedintheAddress
list.
6. StartHPClusteredFileSystemonthe
newserver.Selectthenew
serverfromtheAddresslist,and clickStartServicetostarttheHP
ClusteredFileSystemserviceonthatserver.WhenHPClusteredFile
Systemisrunningontheserver,clickOKtoclosetheServer
Configurationwindow.
7. Connecttothecluster.SelectStart>
Programs>HPClustered
Gateway>HPCFSManagementConsole,andthenspecifyanyserver
intheclusterontheConnectionParameterswindow.Thenewserver
isnowinthecluster.