HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter4:OtherProcedures 44
3. SelecttheserverintheAddresscolumn,andthenclickExport.The
LastOperationProgresscolumndisplaysstatusmessagesasthe
configurationisexportedtotheserver.
4. StartHPClusteredFileSystemontheserver.Theserverisstill
selectedintheAddresscolumn.ClickStartServicetostartHP
Clustered
FileSystem.AstatusmessageisdisplayedintheLast
OperationProgresscolumn.
WhenHPClusteredFileSystemisrunningontheserver,youcan
closetheServerConfigurationwindow.
Whenyouconnecttothecluster,thenewserverisdisplayedontheHP
ManagementConsole.
Upgrade the HP Clustered File System
License File
Apermanentlicensefileispre‐installedonthesystem.Ifanewlicenseis
required,useoneofthefollowingprocedurestoupgradethelicensefile
onallserversinthecluster.
Upgrade Servers One-at-a-Time
InWindowsExplorer,gototheCDandlocatetheLicensefolder.Double‐
clicktheInstall_License.exefile,whichinstallsthelicense.
Alternatively,youcancopythelicensefilelocatedonCD\Licensefolder
toanylocationonC:\andtheproceduredocumentedbelowcanbe
followed.
1. OntheHPManagementConsole,selectFile
>Configure.
2. OntheGeneralSettingstab,selectChangeLicenseFile.
3. Typethepathtothenewlicensefileorbrowsetoit.
4. ClickApply.