HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

Chapter4:OtherProcedures 45
NOTE: Thisproceduredoesnotrequireanydowntime.Repeatthis
procedureoneachserverinthecluster.
Upgrade One Server and Export
ThisprocedurerequiresthatHPClusteredFileSystembestoppedonall
servers.Executetheprocedureononeserverinthecluster.
1. Ononeserver,selectStart>Programs>HPClusteredGateway>HP
CFSManagementConsole.OntheConnectionParameterswindow
thatopensnext,entertheIPaddressof
theserver,typetheuserand
password,andthenclicktheConfigurebutton.
NOTE: Ifthereisa.matrixrcfileonthesystemrunningmxconsole,
youwillseeaDisconnectdialoginsteadoftheConnection
Parameterswindow.Select“Logontoanotherclusterserver”
andthenclickConfigure.
2. SelecttheClusterWideConfigurationtab,andthenstoptheservice
onallnodes.
3. ReturntotheGeneral
Settingstaband selectChangeLicenseFile.
4. Typethepathtothenewlicensefileorbrowsetoit.
5. ClickApply.
6. Starttheclusterservicewhenprompted.(Thisstartstheserviceonthe
connectednode.)
7. Exporttheconfigurationtoallotherservers.
8. StarttheHPClusteredFileSystemserviceon
allothernodes.