HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

AppendixA:ConfiguretheClusterfromtheCommandLine 47
Thecommandsequenceis:
mx --matrix nodeA config license <file name>
mx --matrix nodeA config secret <alphanumeric key>
mx --matrix nodeA config protocol [Multicast|Unicast]
mx --matrix nodeA config santype fc
mx --matrix nodeA config fcswitch [--community <string>] <switch> ...
mx --matrix nodeA config fcfencing
mx --matrix nodeA config mp set <uuid1/partno> [<uuid2/partno>
<uuid3/partno>]
mx --matrix nodeA config snapshot add --method <type> [--options
<method options>]
(Thiscommandisneededonlyifyouwillbeusingthesnapshotfeature.)
mx --matrix nodeA server add nodeA
mx --matrix nodeA server start nodeA
mx --matrix nodeA config description <description>
TheclusterisnowconfiguredandHPClusteredFileSystemisrunning
onnodeA.Repeatthefollowingcommandstoaddtheremainingnodes
tothecluster,exporttheconfigurationtothenodes,andstartHP
ClusteredFileSystem.
mx --matrix nodeA server add <nodename>
mx --matrix nodeA config export <nodename>
mx --matrix nodeA server start <nodename>
Theinitialconfigurationoftheclusteriscomplete.
Web Management-Based Fencing
Thisexampleassumestheclusterwillincludefournodes:nodeA,nodeB,
nodeC,andnodeD.ThecommandsarerunfromnodeAbyamemberof
themachine’slocalAdministratorsgrouponthatnode.
Thecommandsequenceis:
mx --matrix nodeA config license <file name>
mx --matrix nodeA config secret <alphanumeric key>