HP StorageWorks X5500 Network Storage Gateway for Windows setup guide (AP809-96004, October 2009)

AppendixA:ConfiguretheClusterfromtheCommandLine 50
MATRIX="nodeA"
# Other Nodes
NODES="nodeB nodeC nodeD"
# FibreChannel Switch Information
SWITCHES="99.10.180.253"
# Membership Partitions
MP="6-6005-08B3-0090-A860-22BE-8098-CC0A-0041/1 6-6005-08B3-0090-
A860-22BE-8098-CC0A-0041/2 6-6005-08B3-0090-A860-22BE-8098-CC0A-
0041/3"
# License File
LICENSE="permanent.lic"
# Community SNMP String used by Switches
COMMUNITY="public"
# The Secret Network Key
SECRET="secret"
# Authentication Information
USER="Administrator"
PASSWORD="Admin"
Command Descriptions
Themxcommandsusedintheconfigurationspecifythefollowing
information.
mx config license <file name>
ThelocationoftheHPClusteredFileSystemlicensefile.Thefilemust
bepresentontheserverrunningthecommand.
mx config secret <alphanumeric key>
Thispasswordprovidesadditionalsecurityfornetwork
communicationsamongtheserversinthecluster.Thepasswordcan
containupto127characters.
mx config protocol Multicast|Unicast
TheprotocolusedforHPClusteredFileSystemadministrativetraffic.
ThedefaultisMulticast.
mx config santype fc|iSCSI
WhethertheSANusesFibreChanneloriSCSI.Thedefaultis
FibreChannel.