HP ProLiant Gen8 Server with HP iLO Management Engine Setup Guide

will appear across the top of the screen to notify you when an update is available.
Clicking this banner takes you to the Firmware Update page.
◦ HTTP/FTP — Requires an address of a local repository in the URL field. If you use
an FTP path, do not include spaces or punctuation.
◦ Disable—Select this if you plan to use only the system software embedded on the
shipped server, instead of using Intelligent Provisioning, to perform updates. You
can download SPP from the HP website:
http://hp.com/go/spp/download
• Current Date-Time—The current date and time can be changed through this setting.
4. Click Continue.
Click Continue. The Intelligent Provisioning activation page appears. To continue configuring
your new HP ProLiant Gen8 server, select Activate (Recommended) and then click Continue.
Figure 4 Intelligent Provisioning activation
When activated, you can access Intelligent Provisioning during server POST by pressing the
F10 key. If you disable Intelligent Provisioning, pressing the F10 key during POST does not
launch Intelligent Provisioning.
To re-enable Intelligent Provisioning, from the RBSU Boot menu, select Server Security→Intelligent
Provisioning (F10 Prompt)→Enabled.
30 Booting for the first time