HP ProLiant Gen8 Server with HP iLO Management Engine Setup Guide

Step 4: Review
The Review screen displays your hardware and OS settings.
CAUTION: Continuing past this screen resets drives to a newly installed state and installs the
selected OS. Existing data on the server drives will be lost. This will not affect a first-time setup.
Figure 11 Review step
1. Review the information to confirm your choices.
2. Click Continue. When you click Continue, all drives will be reset and all data on them will be
lost before the OS is installed. This does not affect a first-time setup because there is no data
present yet.
If you chose to update the system software before installation, the HP Insight Update screen appears
and the update starts. Click Show Details for a detailed list of the update installation. When the
update is finished, the server automatically reboots and begins the OS installation. Follow the OS
prompts to complete the OS installation.
Manual Installation
If you selected a manual install, review the OS information here. When ready, click Continue and
the server will reboot to the OS media and begin the OS installation.
Configure and install 41