HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 116
Array controller <controller name / slot information> is also reporting that the
last physical drive to report a fatal error condition (associated with this
logical request), is located on bus <bus number> and ID <ID number>.
Message Id: 24607
Severity: Warning
Log message: The event information received from array controller <controller name
/ slot information> was of an unknown or unrecognized class.
An excerpt of the controller message is as follows: <message from firmware>.
Message Id: 24608
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
storage box number <box number> was added to port <port number>. This connection
is through I/O module number <module number> on the storage box.
Message Id: 24609
Severity: Error
Log message: Array controller <controller name / slot information> has reported that
storage box number <box number> was removed from port <port number>. This
connection was through I/O module number <module number> on the storage box. This
event can occur when either a sole I/O module or data cable is removed.
Message Id: 24610
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
either redundant I/O module number <module number> in box <box number> was removed
or the cable to this module was removed. The cable and I/O module were connected
to port <port number> of the array controller.
Message Id: 24611
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
either redundant I/O module number <module number> in box <box number> was added
or the cable to this module was connected. The cable and I/O module are connected
to port <port number> of the array controller.
Message Id: 24612
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
box <box number> connected to port <port number> is now marked as repaired
(re-added after a previous failure).
Message Id: 24613
Severity: Informational
Log message: Array controller <controller name / slot information> has reported that
either redundant I/O module number <module number> in box <box number> was
repaired or its' path was repaired. Box <box number> is connected to port <port
number> of the array controller.
Message Id: 24614