HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 126
be found in bay <bay number> of box <box number> connected to port <port number>
of array controller <controller name / slot information>.
<additional data> values:
• “The party data does not match the data drives.“
• “”
Message Id: 24676
Severity: Informational
Log message: Surface analysis has repaired an inconsistent stripe on logical drive
<logical drive number>. This repair was conducted by overwriting the
statistically incorrect stripe on the physical drive found in bay <bay number>
of box <box number> connected to port <port number> of array controller
<controller name / slot information>.
Message Id: 24677
Severity: Informational
Log message: Surface analysis has repaired an inconsistent stripe on logical drive
<logical drive number> connected to array controller <controller name / slot
information>. This repair was conducted by updating the parity data to match the
data drive contents.
Message Id: 24678
Severity: Warning
Log message: The license key <license key> on array controller <controller name /
slot information> is nearing its expiration date. The license key will expire
in <number of days> day(s).
Message Id: 24679
Severity: Error
Log message: The license key <license key> on array controller <controller name /
slot information> has expired.
Message Id: 24680
Severity: Informational
Log message: The firmware image for Smart Array controller <controller name / slot
information> has changed.
The firmware was flashed from:
Revision: <old revision number>
to
Revision: <new revision number>
Message Id: 24681
Severity: Warning
Log message: Device bus fault occurred on storage box <box number>, port <port
number> of array controller <controller name / slot information>. This may result
in a downshift in transfer rate for one or more hard drives on the bus.
Message Id: 24682