HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 151
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24780
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting inconsistent data that was previously
consistent.<additional information>The inconsistent data may be caused by a power
loss during write activity or by a drive returning corrupt data. The inconsistent
data is between block address <lba number 1> and block address <lba number 2>
of logical drive <logical drive number>. The physical drive containing the
inconsistent data can be found in bay <bay number> of the MSA chassis.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
<additional information> values:
• “ The parity data does not match the data drives.”
• “”
Message Id: 24781
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that fan module <module number> was <inserted
/ removed>.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24782
Severity: Error
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that fan module <fan module number> has failed.
The external Smart Array controller may attempt to shut down power and/or spin
down the installed disk drive(s).
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24783
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that fan module <fan module number> is reporting
a degraded condition.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id: 24784
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that fan module <fan module number> is now
operational.