HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Smart Array errors 155
Message Id 24802
Severity: Informational
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> is reporting that its cache is missing. This is an unsupported
configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24803
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
it previously locked up with code <lockup code>.
Message Id 24804
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that it previously locked up with code <lockup
code>.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24805
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
Supercap is enabled but the cache module flash memory is missing. This is an
unsupported configuration.
Message Id 24806
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that Supercap is enabled but the cache module
flash memory is missing. This is an unsupported configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.
Message Id 24807
Severity: Warning
Log message: Array controller <controller name / slot information> has reported that
the cache module flash memory is installed but Supercap is disabled. This is an
unsupported configuration.
Message Id 24808
Severity: Warning
Log message: The external Smart Array controller located in the MSA chassis labeled
as <chassis label> has reported that the cache module flash memory is installed
but Supercap is disabled. This is an unsupported configuration.
The external Smart Array controller is attached to the host side Smart Array
controller <controller name / slot information>.