HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP Onboard Administrator errors 178

envtools: NVRAM downgraded to version [value]

envtools: Updating NVRAM version to 19.

envtools: Updating NVRAM version to 20.

envtools: Updating NVRAM version to 21.

envtools: Updating NVRAM version to 22.

envtools: Updating NVRAM version to 23.

envtools: Updating NVRAM version to 24.

envtools: Updating NVRAM version to 25.

envtools: Updating NVRAM version to 26.

envtools: Updating NVRAM version to 27.

envtools: Updating NVRAM version to 28.

envtools: Updating NVRAM version to 29.

Firmware flash log messages

Log type: LOG_ALERT, Failure type: SW

FWSync: OA firmware sync flash failed and system is in an unstable state. Do not

reboot! Try to flash again with a new image.

OA_Flash: Flash failed and system is in an unstable state. Do not reboot!Try to

flash again with a new image.

Log type: LOG_ERR, Failure type: SW

FWSync: Error opening OA firmware sync image.

FWSync: Invalid flash image.

FWSync: OA firmware sync image is corrupted.

FWSync: OA firmware sync image is older than current firmware.

FWSync: Only one flash instance can run at a time.

FWSync: Only one instance of OA firmware sync can run at a time.

OA_Flash: Downloading flash image failed.

OA_Flash: Error opening [value] for input.

OA_Flash: Firmware image is corrupted or not a valid image. Please verify the

url and try again.

OA_Flash: Firmware version [value:version] is not supported on this hardware.

OA_Flash: Found core file. Reboot after flash suppressed to allow developer to

debug.

OA_Flash: Invalid flash image.

OA_Flash: Only one flash instance can run at a time.

OA_Flash: Out of memory while decoding flash image.