HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP iLO errors 231
Event log display Event log explanation
Virtual Floppy in use by: User
Displays when a user begins using a Virtual Floppy.
Remote Console login: User
Displays when a user logs on a Remote Console session.
Remote Console Closed
Displays when a Remote Console session is closed.
Failed Console login - IP Address: IP address
Displays a failed console login and IP address.
Added User: User
Displays when a local user is added.
User Deleted by: User
Displays when a local user is deleted.
Modified User: User
Displays when a local user is modified.
Browser login: User
Displays when a valid user logs on to iLO using an Internet
browser.
Browser logout: User
Displays when a valid user logs off iLO using an Internet
browser.
Failed Browser login ? IP Address: IP address
Displays when a browser login attempt fails.
Remote Console login: User
Displays when an authorized user logs on using the Remote
Console port.
Remote Console Closed
Displays when an authorized Remote Console user is
logged out or when the Remote Console port is closed
following a failed login attempt.
Failed Console login ? IP Address: IP address
Displays when an unauthorized user has failed three login
attempts using the Remote Console port.
Added User: User
Displays when a new entry is made to the authorized user
list.
User Deleted by: User
Displays when an entry is removed from the authorized user
list. The User section displays the user who requested the
removal.
Event Log Cleared: User
Displays when the user clears the Event Log.
Power Cycle (Reset): User
Displays when the power has been reset.
Virtual Power Event: User
Displays when the Virtual Power Button is used.
Security Override Switch Setting is On
Displays when the system is booted with the Security
Override Switch set to On.
Security Override Switch Setting Changed to Off
Displays when the system is booted with the Security
Override Switch changed from On to Off.
On-board clock set; was previously [NOT SET]
Displays when the on-board clock is set. Displays the
previous time or “NOT SET“ if no time was set.
Logs full SNMP trap alert failed for: IP address
Displays when the logs are full and the SNMP trap alert
failed for a specified IP address.
Security disabled SNMP trap alert failed for: IP
address
Displays when the security has been disabled and the
SNMP trap alert failed for a specified IP address.
Security enabled SNMP trap alert failed for: IP
address
Displays when the security has been enabled and the
SNMP trap alert failed for a specified IP address.
Virtual Floppy connected by User
Displays when an authorized user connects the Virtual
Floppy.
Virtual Floppy disconnected by User
Displays when an authorized user disconnects the Virtual
Floppy.
License added by: User
Displays when an authorized user adds a license.
License removed by: User
Displays when an authorized user removes a license.
License activation error by: User
Displays when an error occurs activating the license.
iLO RBSU user login: User
Displays when an authorized user logs in to iLO RBSU.