HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP iLO errors 233
Status number Error message
0x0008
Cannot modify user. The login/ user name already exists.
0x0009
Cannot delete user information for currently logged user.
0x000A
User login name was not found.
0x000B
User information is open for read-only access. Write access is
required for this operation.
0x000C
Server information is open for read-only access. Write access is
required for this operation.
0x000D
iLO information is open for read-only access. Write access is
required for this operation.
0x000E
Rack information is open for read-only access. Write access is
required for this operation.
0x000F
Directory information is open for read-only access. Write access is
required for this operation.
0x0010
Internal error. Unknown RIB action.
0x0011
Internal error. Unknown SERVER action.
0x0012
Virtual Power Button feature is not supported or not enabled on this
server.
0x0013
Virtual Power Button cable is attached.
0x0014
Virtual Power Button cable is either not attached or not supported.
0x0015
The IP address specified is not valid.
0x0016
The firmware image file is not valid.
0x0017
A valid firmware image has not been loaded.
0x0018
The flash process could not be started.
0x0019
The Remote Insight Board Firmware is being updated. The board will
be reset after the operation.
0x001A
The Remote Insight Board is being reset.
0x001B
The server is being reset.
0x001C
The Integrated Lights-Out Event Log is being cleared.
0x001D
No image present in the Virtual Floppy drive.
0x001E
An invalid virtual floppy option has been given.
0x001F
Failed to allocate virtual floppy image space.
0x0020
The Virtual Floppy image is invalid.
0x0021
The key parameter specified is not valid.
0x0022
The SESSION TIMEOUT value specified is greater the maximum value
allowed, 120.
0x0023
User does NOT have correct privilege for action. ADMIN_PRIV required.
0x0024
User does NOT have correct privilege for action. RESET_SERVER_PRIV
required.
0x0025
User does NOT have correct privilege for action. UPDATE_ILO_PRIV
required.
0x0026
User does NOT have correct privilege for action. CONFIG_ILO_PRIV
required.
0x0027
User does NOT have correct privilege for action. CLEAR_LOGS_PRIV
required.
0x0028
User does NOT have correct privilege for action. CONFIG_RACK_PRIV
required.
0x0029
User does NOT have correct privilege for action. VIRTUAL_MEDIA_PRIV
required.
0x002A
Server is NOT a rack server; Rack commands do not apply.
0x002B
Minimum password length value exceeded.