HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

HP iLO errors 235
Status number Error message
0x0054
Command without TOGGLE="Yes" attribute is ignored when host power
is off.
0x0055
Duplicate record exists.
0x0056
Premature operation refused.
0x0057
SSH key was not found.
0x0058
There is no user name or the user name appended to SSH key does not
exist.
0x0059
SSH key is too large for storage space.
0x005A
No available slot for additional SSH key.
0x005B
A Trusted Platform Module (TPM) has been detected in this system.
TPM_ENABLED needs to be set to "Yes" in order to perform firmware
update.
0x005C
Firmware image is not available or not valid.
0x005D
Firmware flash failed.
0x005E
Open flash part failed.
0x005F
Login failed.
0x0060
RIBCL parser is busy. Retry later.
0x0061
RIBCL parser is not active. No output is being generated.
0x0062
VLAN configuration is available on Shared Network Port(SNP) only.
Either modify this script to enable SNP or do it manually.
0x0063
Changing link configuration is NOT allowed for Shared Network
Port(SNP). Avoid options: SPEED_AUTOSELECT, NIC_SPEED and/or
FULL_DUPLEX.
0x0064
Chosen Interface is not set to be enabled, thus no change in
configuration. ENABLE_NIC needs to be set to "Yes" to proceed.
0x0065
Invalid VLAN ID. Valid Range is: 1 to 4094, both inclusive.
0x0066
Power capping is handled by Onboard Administrator.
0x0067
Power capping information is not available.
0x0068
Duplicate of existing SSH key.
0x0069
Invalid SSH key data.
0x006A
User data error, please retry.
0x006B
iLO has been automatically configured for Flex-10 mode therefore NIC
configuration is not allowed.
0x006C
This command cannot be run from this account.
0x006D
The iLO is not configured for this command.
0x006E
iLO may not be disabled on this server.
0x006F
Keytab Error, Keytab not properly encoded.
0x0070
Could not set the Default Language.
0x0071
Could not get the Default Language.
0x0072
Single sign on server index could not be found.
0x0073
Could not get the current timezone.
0x0074
Could not find the timezone selected.
0x0082
eRS - Only one connect model can be selected.
0x0083
eRS - Missing required parameter for direct connect model setup.
0x0084
eRS - Missing required parameter for IRS connect model setup.
0x0085
eRS - No connect model specified.
0x0086
There are missing parameters in the xml script.