HP ProLiant Gen8 Troubleshooting Guide Volume II: Error Messages

Microsoft Windows Event ID and SNMP traps 255
Microsoft Windows Event ID and SNMP traps
Event log messages associated with SNMP traps
This section contains a listing of the Microsoft® Windows Server® 2003 Event Log messages associated with
SNMP traps, which are generated by the HP Insight Management Agents for Servers for Windows®. Each
event entry has the corresponding SNMP trap number used by the agents. Other information on the events
in this section includes Event Severity, Event Message, Event Message Source, Event Symptom, and
Supporting SNMP Trap Data.
Windows NT® event log format
The following pages contain HP Insight Management events that are entered into the Microsoft® Windows
NT® Event Log when they occur.
Values are 32-bit values laid out as follows:
3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+----+---+—--+--------------------+--------------------------------------------+
|Sev | C|R | Facility | Code |
+----+--+-—-—+--------------------+------------------------------------------+
where:
Sev—The severity code
00—Success
01—Informational
10—Warning
11—Error
C—The customer code flag
R—A reserved bit
Facility—The facility code (always “CPQ”)
Code—The facility’s status code—the event number; the upper byte refers to the HP Insight Management
Agent that served the event, the lower byte is the actual event number
Agent descriptions
• Foundation/Host Agent—cpqhsmsg
• Sever Agent—cpqsvmsg